Chrysler Prowler Key Fob Programming by Year
Can you program a Prowler fob without the dealer? For most years, yes. Pick your year for the route and best next step.
Find your year
| Year | DIY onboard? | How it programs | Working fob? | Erase risk | Confidence | Best next step |
|---|---|---|---|---|---|---|
| 2001–2002 | Yes | Yes - onboard relearn | Yes (1 working) | — | Med | Follow the steps below |
Chrysler Prowler key types & programming facts
The 2001–2002 Chrysler Prowler uses a conventional metal ignition key with a separate keyless-entry remote, not a transponder or proximity system. Replacement remotes must be matched by FCC ID (commonly GQ43VT13T or GQ43VT17T) and then programmed to the vehicle using an onboard procedure that involves cycling the ignition and using the existing remote or vehicle switches. Mechanical keys are simply cut to match the existing lock pattern, while the electronic remote portion requires programming so the car recognizes its lock/unlock and panic signals.
Key types used on the Prowler:
- standard non-transponder metal key (no chip, separate remote for keyless entry) (2001-2002)
Common fob FCC IDs: GQ43VT13T, GQ43VT17T — check the back of your fob; we confirm the exact variant on site.
2001–2002 Chrysler Prowler
Route verified — exact steps vary by trim/equipment
Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.
Show the programming methods (23 steps)
Vehicle Requirement
Ignition & Entry Steps
Entering Programming Mode
Programming Additional Remotes
Troubleshooting & Extras
For the 2001–2002 Prowler: Prowler key replacement & all compatible fobs →
How we validate this guide
Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.
| Year | Route status | Exact steps |
|---|---|---|
| 2001–2002 | Route verified | General guidance |
Common questions
Does my 2001–2002 Chrysler Prowler key have a transponder chip?
No. These Prowlers use a standard metal key and a separate keyless-entry remote, not a chipped or proximity key system.
Which remote do I need for a 2001–2002 Chrysler Prowler?
Use a 3‑button keyless-entry remote matched by FCC ID, typically GQ43VT13T or GQ43VT17T, with lock, unlock, and panic functions.
Can I program a replacement remote for my Prowler myself?
Yes. The 2001–2002 Prowler supports onboard programming for compatible keyless-entry remotes when you follow the specified ignition and button-sequence procedure.
Can you program a Prowler key fob without going to the dealership?
For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.
Does this program the remote only, or the transponder key too?
It depends on your key type. Tell us your FCC ID and we will confirm.
What if my year says professional programming required?
Those years need a programmer or security access; we bring the tool to you and program it on site.
How much does it cost?
It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.