GM OEM Transponder Key (chip ID46) – DWO5 Blade, Fitments & Info
Sourcing decisions for the GM OEM Transponder Key (chip ID46) split between OEM and aftermarket paths, with meaningful differences in chip quality and blade tolerance. An OEM unit carries the Philips ID46 transponder embedded inside the key head, ensuring factory-grade immobilizer communication with the vehicle’s body control module. Aftermarket variants of this key are widely available, but inconsistencies in chip calibration and blade precision can sometimes complicate the cloning or programming process. The GM OEM Transponder Key (chip ID46) uses the DWO5 keyway profile, a detail that must be verified before cutting. For technicians working with this product, every variant — OEM or aftermarket — requires pairing to the vehicle’s immobilizer system via a compatible diagnostic tool or on-board programming sequence. When replacing the GM OEM Transponder Key (chip ID46), confirm the DWO5 blade blank is on hand and that the ID46 chip is functioning before beginning the cut-and-program workflow.
GM OEM Transponder Key (chip ID46): Chip and Blade Specifications
The Philips ID46 transponder chip at the core of this key belongs to a well-established family of crypto transponders used across multiple General Motors platforms. The ID46 — also commonly referenced as a PCF7936 in industry catalogs — operates using a challenge-response authentication protocol with the vehicle’s immobilizer. When the key is inserted into the ignition cylinder and turned, the immobilizer antenna ring energizes the chip, which then transmits its encrypted response. If the response matches the stored credentials in the vehicle’s electronic control unit, the engine is permitted to start.
The DWO5 keyway defines the physical blade profile. This is a high-security sidebar-style cut that requires a code machine or duplicator capable of handling the DWO5 specification. Locksmiths should note that the DWO5 designation also appears as the FCC-related identifier for this product, though it refers primarily to the mechanical key blank profile rather than a radio frequency certification. Since this is a transponder-only key — not a remote head or proximity fob — there is no remote button functionality and no RF transmission involved in its operation.
Vehicle Compatibility
Based on confirmed fitment data, the key is compatible with the following General Motors vehicles:
- Chevrolet Captiva — model years 2006 through 2018
- Saturn Vue — model years 2008 through 2010
The Chevrolet Captiva spanned a broad production run across global markets, and the ID46-based immobilizer system was standard across those years. The Saturn Vue, produced during the final years of the Saturn brand under General Motors, shares the same transponder platform for the 2008–2010 model range. Both vehicles use the DWO5 blade profile, so a single blank type services both fitments — a practical advantage for locksmiths stocking inventory.
Programming Considerations for Automotive Locksmiths
Programming the ID46 chip to a Chevrolet Captiva or Saturn Vue typically requires a diagnostic programming tool that supports General Motors immobilizer systems. Tools from major manufacturers such as Autel, Xtool, and Advanced Diagnostics generally cover these platforms. The procedure involves reading the immobilizer data from the vehicle’s BCM (body control module), registering the new transponder chip, and verifying start functionality.
One important consideration: the ID46 is a crypto chip, meaning it cannot simply be copied with a basic cloner the way older fixed-code transponders can. The chip must be programmed to generate the correct encrypted handshake with the specific vehicle. Some aftermarket cloning devices do support ID46 emulation, but for reliable results — especially on the Captiva’s longer production span — on-board or pin-code-based programming through the OBD-II port is the preferred method.
For all-keys-lost scenarios on these vehicles, the locksmith will typically need to extract the security pin or perform an EEPROM read of the BCM to register a fresh transponder. This is a more involved procedure that demands familiarity with the General Motors security architecture and the correct diagnostic hardware.
OEM vs. Aftermarket: Practical Differences
The factory-original version of this key ensures dimensional accuracy on the DWO5 blade and a Philips-manufactured ID46 chip. Aftermarket blanks with pre-installed ID46 chips are significantly less expensive and are the standard choice for most locksmith service calls. The quality gap has narrowed over the years, but locksmiths occasionally encounter aftermarket ID46 chips that fail to program on the first attempt or exhibit inconsistent signal strength during the immobilizer handshake.
When selecting aftermarket blanks, it is worth sourcing from reputable distributors who guarantee Philips-origin (or NXP-origin, as Philips Semiconductors became NXP) ID46 chips rather than unbranded clones. The blade material also matters — softer aftermarket brass can wear faster in the ignition cylinder compared to the harder alloy used in OEM blanks.
Key Cutting Notes for the DWO5 Profile
The DWO5 blade is a relatively straightforward profile for shops equipped with modern code-cutting machines. Depths and spacings follow published General Motors bitting specifications. If cutting by code, the key code can typically be pulled from the vehicle’s door lock or obtained through the VIN via General Motors dealer channels. If duplicating from an existing key, a quality tracer and cutter setup calibrated for the DWO5 blank will produce accurate results.
Locksmiths should inspect the ignition cylinder condition before delivering a newly cut key to the customer. On high-mileage Captivas and Vues, worn wafers in the ignition can cause intermittent mechanical issues that may be mistakenly attributed to a bad key cut or transponder fault.
Specifications and fitment
| Key type | Transponder Key |
|---|---|
| Transponder chip | ID46 |
| Chip manufacturer | Philips |
| Keyway | DWO5 |
| FCC ID(s) | DWO5 |
| Region(s) | USA |
| Product type | Transponder |
| Compatible makes | Chevrolet, Saturn |
Listed vehicle fitment
| Make | Model | Years |
|---|---|---|
| Chevrolet | Captiva | 2006–2018 |
| Saturn | Vue | 2008–2010 |
Fitment must be confirmed against the existing key’s FCC ID family and the vehicle’s exact configuration before cutting or programming. VIN or photo verification may be required.
Questions and answers
Which vehicles does GM OEM Transponder Key (chip ID46) fit?
GM OEM Transponder Key (chip ID46) is listed to fit Chevrolet, Saturn applications such as Chevrolet Captiva, Saturn Vue. Confirm the exact year range and the existing key’s FCC ID family before ordering, since fitment can vary by trim and region.
Does GM OEM Transponder Key (chip ID46) need programming?
Yes. Because it carries a transponder/remote function (chip ID46), it must be programmed (paired) to the vehicle’s immobilizer and, for remote functions, to the keyless-entry system. Many vehicles also require at least one working key to add a new one.
Does the blade need to be cut?
Most GM OEM Transponder Key (chip ID46) units ship uncut and require automotive key cutting before they will turn the ignition or door lock. Cutting establishes the mechanical match; programming establishes the electronic match — both are needed.
Is GM OEM Transponder Key (chip ID46) OEM or aftermarket?
This listing is an aftermarket-grade replacement intended to match the original key’s electronic and mechanical specification. It is not required to carry a vehicle-brand logo and should be matched by FCC ID family and chip type rather than by appearance.
Check Fitment and Key Help
Low Rate Locksmith, a mobile automotive locksmith, can confirm whether GM OEM Transponder Key (chip ID46) matches an existing FCC ID family and coordinate cutting and programming when the vehicle configuration requires professional service. For dispatch and support, call (833) 439-8636 or email info@lowratelocksmith.com.
Frequently asked questions
Get help for your vehicle
Share your year + situation and we'll confirm compatibility and a typical price range. Or call the dispatch number directly.
- ✅ Compatibility first
- 🧾 Itemized scope
- 🪪 Authorization required